LaMar Lighting Company introduces DS-LED, a dual sensor luminaire with an optional 90-minute emergency battery pack to its Occu-smart® line of bi-level lighting. Controlled by two highly sensitive external infrared motion sensors, DS-LED provides safe, dependable illumination while conserving energy. Operating at 20% power and consuming as little as 5W in standby mode, DS-LED offers sufficient illumination for stairwells, corridors, conference and utility rooms and other areas where maximum light levels are not required on a constant basis. Upon occupancy, the fixture illuminates to full capacity consuming only 25W. The unit covers a 360-degree, 26-foot diameter range using two motion sensors, which can be adjusted in the field for optimum coverage, range and time delay using optional IR remote control.

Elusive and revealing: JILL combines the best of both qualities within a striking, slender aperture that almost dissolves into the ceiling, yet still unveils a subtle glow from the unique squared acrylic dropped-lens. Recessed fixtures feature 1.65” or 3.25” apertures for ceiling or wall, and can be mounted as either Trim (TR) or “Trim-less” (TL) installations. Trim (TR) 3/4” flange, while “Trim-less” (TL) features mud-over flange allowing for only a hairline reveal. Available with LED or Fluorescent light sources.

VersaBay® luminaires are the new industry standard for fluorescent high bay lighting with Advanced Thermal Management, serviceability, and performance that is unrivaled in the marketplace. VersaBay® UL listed high bays carry an unequaled ballast warranty of 5 years at 65°C for T5HO and 55°C for T8 (277V). The VersaBay® high bay was developed to address the issues of elevated temperature by creating a systems approach to properly dissipate and control the heat-producing elements.

The HBLH Series Hazardous LED Floodlight is designed to efficiently light classified areas in heavy industrial settings and warehouses with its high performance LED design and delivery of up to 100 lumens per watt of 5000 deg K light. The unique radial design with fins of durable cast aluminum allows it to operate in -40˚C to 55˚C ambient environments and keeps the LEDs cool, resulting in an estimated 100,000 hours of life at L70.

The EHB LED brings the benefits of gasketed enclosures to High Bay and Low Bay applications. The EHB utilizes a gear tray design with symmetric hinging for easy wiring access. The contoured lens incorporates frost material with maximum light transmission and minimal LED pixelation. The housing is sealed against dust and moisture.

Thin and small, yet incredibly strong, combination of cables and grippers come together in perfect harmony for the ultimate system of strength and ease-of-use. Wisp™ is perfect for the new lightweight LED fixtures now coming to market. It is dependable, without upstaging what’s truly important - your fixture.

Millenium Stretch™ (MLHA Series) is a flexible lighting system that offers an attractive solution for areas that demand high performance, minimal maintenance and durability. Whether lighting general purpose rooms in schools, physical fitness facilities, natatoriums or stairwells, Millenium Stretch has the versatility to meet the needs of any architectural high abuse or rough service application.

Waldmann North America is excited to announce availability of the newest addition to our line of magnifiers, the TEVISIO LED Magnifier. Ideal for workstations in laboratory, industrial, healthcare and quality control applications, TEVISIO is engineered for highly demanding visual tasks. With TEVISIO, sophisticated design is made simple with the latest in LED lighting technology, sophisticated ergonomic controls and premium magnifier performance.

�- Frosted White Acrylic Diffuser �

- Steel Mounting Pan With Matte Silver Powder Coat Finish, Aluminum Reflective LED Mount Plate

�- Open Top & Bottom �

- ADA Compliant, LED Light Fixture, Mounting Hardware Included

Lamar Lighting's new Economy High Bay offers an economical alternative to 'full housing' units without sacrificing light output or efficiency. In fact, a four lamp T5 unit boasts a luminaire efficiency of 98.4%! Shipped fully assembled, units are available in both T5 and T8 lamp options in either four or six lamp configurations. Although billed as an 'economy' luminaire, the EHB series features premium components, universal voltage ballasts and unique options including closed end caps and engineered linear acrylic reflector design combining efficient reflection and refraction to manage brightness while delivering even indirect illumination. Standard reflectors are 95% reflectivity specular aluminum, or high reflectance white. For added energy savings, units are available with factory installed motion sensors.

Aleddra’s UFO luminaire features a stylish design and a lower profile, and is designed for any indoor lowbay or highbay application. It saves 70% energy as compared to existing highbay fixtures and comes with 5-year warranty.

The EPLB Series combines sealed, durable construction with a choice of reflector/refractor options, including high-impact acrylic/ polycarbonate relector/refractors and diffusers, and high efficiency, spun aluminum reflectors. Clear thermoplastic lens includes high performance optics offering industry-leading 25% up-light option for high vertical illumination for comfortable, high visibility, environments. Ideal for food processing multipurpose rooms, and high ceiling retail/food court spaces.

Hosedown Series LED high bay fixtures are designed for use in demanding environments that require watertight seals including food/beverage processing, cold storage, warehouses, garden centers, and industrial facilities. Highly energy efficient, each Hosedown model includes an injection molded fiberglass model with a sturdy lens to withstand hosedown cleanings and environments where extreme dust and moisture are factors.

An enclosed and gasketed HID fixture series, the KS III LED is for use in corrosive, wet and dirty industrial applications such as power generation, sewage treatment and pulp/paper or steel mills. It includes an Electro-Reg® ballast that provides a long life, high lumen maintenance and a metal halide light source for low operating and maintenance costs. The copper-free (<0.4%) aluminum housing and cover and guard with Lektrocote® powder polyester paint in gray finish provides excellent corrosion resistance from most chemicals. Its modular design permits selection of cover, body, globe, guard and reflector for custom applications.

Introducing the versatile new LED V Series fixture from LGI. IP65 rated, the 4-foot model is 70 watts and produces 6,845 lumens in 4000K or 5500K. Available in 2-foot 30W 2700 Lumens, 3-foot 55W 5300 Lumens, and 5-foot 80W 7800 Lumens, this is the go-to unit that can brighten any corner of your world, whether it’s in a warehouse, hangar, factory, office, hallway, stairwell, parking lot or even a shipboard engine room. Available options are : motion sensor, daylight harvesting sensor, and a battery back-up.

LGI does it again with the Alumi Series LED Low-Bay/High-Bay luminaire, with 11,300 Lumens of illumination performance to allow one-for-one replacement of 320W to 400W HID luminaires and multi-lamp fluorescent fixtures. Using a CREE COB powered by a Meanwell driver this fixtures features exceptional rated lifetimes, a stable lumen output while offering zero restrike time and a sleek design. The Alumi Series also provides additional benefits of energy savings and significantly reduced relamp maintenance costs.

LSI Industries recently introduced a number of high performance LED interior lighting fixtures to further expand its family of LED products. All feature high-performance LED optical systems to delivery brilliant, white light to the appropriate horizontal and vertical surfaces. Each new fixture is available in a variety of sizes, color temperatures, lumen outputs and mounting options to address your specific space and application – ambient, wall wash or task lighting. In addition, these fixtures have a choice of controls for extra energy savings. LSI’s energy-efficient LED interior fixtures are designed and built to be virtually maintenance free and carry a limited 5-year warranty.

The Stair Lighter series is highly optimized for use in unattended stairwells by combining rugged vandal resistant construction with state-of-the-art sensor control. The purpose-built shape of the Stair Lighter provides optimal photometric distribution for stairway lighting while the optical pattern punched into the housing allows for protection of the occupancy sensor without reducing its effectiveness. Available with multiple battery back-up options, the Stair Lighter will perform in the wall or ceiling mount position.

Consisting of six models with various lengths, light outputs and diffusers or reflectors, the Aramis range of products is designed for general illumination of indoor spaces. All Aramis models can be pendant, or surface ceiling mounted, and the AR168, one of the models in the range, can also be wall mounted. Most Aramis models deliver 2,000 to 6,500 lumens, depending upon options chosen. However, the AR170, a small yet powerful product in the range, delivers more than 18,000 lumens from its 6” diameter cylinder.

- White or Black Polycarbonate Housing and Fascia, Frosted White Polycarbonate Lens

�- Ambient Operating Temperature -40° C (-40° F) to 40° C (105° F)

�- Constant Current at 700 Milliamps

�- LED Light Fixture, Mounting Hardware Included, UL Listed Wet Location, Vandal Resistant

The HBL Floodlight is made for tough industrial floodlighting jobs. With three lumen packages plus a spot and flood beam, it has the flexibility to fit all industrial flood lighting applications. The rugged low copper alloy aluminum die-cast design, coupled with the heavy-duty yoke and the long life of the LEDs, makes this a floodlight especially suited for today’s harsh industrial environment.

Griplock® Systems Industrial Kits help manufacturers and installers keep pace and stay competitive. We offer a popular range of well-priced kits that cover just about every lighting installation. There are two assemblies per kit, including the Griplock® grippers which are hand-adjustable and don’t require tools. Where it stops it locks®. 

LGI Technology, the Los Angeles-based, commercial grade LED lighting manufacturer, proudly announces the launch of its new 100W LED Acrylic High Bay Fixture. The Acrylic High Bay is the latest addition to LGI’s LEDZilla Series. This year LGI Technology released three new LED high bays showcasing unique and innovative designs. Equipped with a CREE CXL-3590 LED, this fixture produces 11,900 Lumens, or 119 Lumens per watt. “This fixture can easily replace a 320W HID lamp,” Product Manager Rob Setian said. “You can’t get this kind of performance from just any 100W LED fixture.” Powered by an industry Mean Well driver, this fixture comes with a 5-year warranty. Heat dissipation is not a concern since the aluminum housing is also the heat sink and the open design helps to strip away heat, keeping it thermally cool.

The newest generation of the Essentials Series LED fixtures delivers superior performance, quality and versatility in low bay and high bay applications. Designed with an even higher efficacy and a best-in-class thermal management for ambient temperatures up to 65°C, the Essentials Series 4.0 provides the highest reliability and best lumen maintenance in the industry while providing the lowest TCO. Featuring rotatable outer modules to optimize the light distribution and provide the highest flexibility to lighting designers, installers and end-users.

The Fail-Safe Harmony Vandal Resistant Linear luminaires (HLV) are now available in LED. Possessing comparable size and lumen output of one, two, three and four T8 lamps in cross-section (from 2,500 to 10,000 initial lumens), the Harmony VR Linear LED fixtures feature a variety of lumen packages and color temperatures (4000K and 5000K), length sizes (1-foot, 2-foot, 4-foot and 8-foot), and offer 50,000+ hour operating life. Energy efficient and environmentally conscious, the products are ideal for areas where the need for aesthetics and protection from vandalism is critical. The most common applications for the LED Harmony VR Linear fixture is for schools, hospitals, corridors, dormitories, public restrooms, common areas, and transit stations

Nora’s new specification-grade LED Retrofit Center Basket Troffers quickly replace fluorescent fixtures and provide smooth and uniform general lighting in offices, schools, conference rooms and more. The retrofit troffers are available in two sizes: 2’ x 2’ with 3000 lumens (30W) or 2’ x 4’ with 4000 lumens (40W). Fixtures have 3500K or 4000K with 85 CRI. The patented, shallow housing design installs in less than five minutes in existing parabolic and lensed door fixtures and does not require access from above. The fixtures offer a completely new appearance and better illumination than an LED lamp replacement.

New LED Wrap Fixtures provide low energy, high lumen and CRI output solution for a wide range of new commercial construction and retrofit applications EarthTronics, dedicated to developing innovative energy-efficient lighting products that provide a positive economic and environmental impact, introduces its new line of high-efficient LED 4-foot Wrap Fixture Series with advanced lighting control capabilities for offices, stairways bathrooms and storage areas for new construction and retrofit commercial projects. Available in 4000k and 5000K with an 80+ CRI, the LED 4-foot Wrap Fixtures from EarthTronics provide 4410 lumens, operating at 120-277 volts. They are equipped with a 0 – 10-volt continuous dimming driver with a dimming range capability of 10 to 100 percent. Advanced control options include daylight harvesting as well as motion detection.

Providing an energy-efficient alternative to traditional Metal Halide and High Pressure Sodium High Bay Fixtures. The Foreverlamp HB Series High Bay fixture utilizes an innovative design that provides the ultimate in flexible LED lighting solutions. The Foreverlamp fixtures come standard with either a 16” reflector (HB1) or a 22” (HB3) reflector. The HB1 fixture with its externally mounted driver can be used with a selection of PS or GS series lamps – you select a single lamp or mix and match lamps it doesn’t matter. This single fixture will work with any of the listed lamps and lumen packages from 27,000 to 20,000 lumens. Similarly, the HB3, with the Foreverlamp SHO lamp, produces 37,000 lumens while only using 320 watts. Both the HB1 and HB3 come with universal voltage LED drivers (120V-277V) and are supplied with 0-10V dimming control. For the ultimate in flexibility, performance, and value the Foreverlamp HB Series is a great energy efficient alternative to HID high bay lighting.

The Square12 is a Housing/Lens combination providing exceptional glare control and a wide distribution. The rounded-square shape of the Square12 ensures good impact strength with a pleasant appearance. The upper housing is made from high impact white polycarbonate suitable for dissipating 42w at 40ºC (depending on mounting style and driver). The enclosure is IP66 rated. A knock-out on each side accommodates conduit, occupancy and/or wireless sensors. Knock-outs on the top provide mounting to standard J-Boxes. Integral or installed gaskets are options.

The LHR Linear Fluorescent High Bay employs the latest in lamp, ballast, and reflector technology to provide effect, energy-efficient lighting for warehouses, gymnasiums, retail, and manufacturing. When replacing traditional metal halide and high-pressure sodium high and low-bays, the LHR can save up to 51% in energy costs versus HID, while providing equivalent light output, improved color rendering, excellent lumen maintenance, simplified dimming and sensor control, battery backup, and the elimination of restrike concerns.

Surf’s up at Nora Lighting with the introduction of the SURF LED surface-mounted ceiling fixture that installs over standard or fire-rated J-boxes. The slim line LED is just 7/8” thick and includes a dimmable driver. It is a practical solution for surface-mounted lighting that appears to be recessed. The edge-lit luminaire has an embedded honeycomb lens light guide that produces even illumination while reducing glare. SURF is available in 4”, 6” and 7” round and square apertures. Producing up to 1000 lumens with temperatures from 2700K to 5000K @ 90+ CRI is ENERGY STAR certified and cULus listed for wet locations.

Aleddra’s new Jelly Jar vapor tight fixture is compact, light weight, and its IP65 rating makes it ideal for wet locations and heavy moisture environments such as coolers and cold storage rooms. The Jelly Jar fixture comes with a CFL-style LED lamp boasting 360 -degree beam angle at an efficacy of 100 lm/w. Its frosted glass also filters most of the blue color light that’s harmful to human eyes. This Jelly Jar fixture operates with 110 to 277V AC line voltage without any ballast. Wattage includes 8W and 13W. Higher wattage ratings will be added later in 2016. The default color options are 3000K, 3500K, 4000K, and 5000K. It comes with 5-year/30,000 -hour warranty, whichever comes first. The CFL-style LED lamp can be purchased separately from Aleddra.

An attractive 2×2 and 2×4 center basket direct/indirect fluorescent fixture, the RDI provides soft, balanced illumination for a contemporary appearance and comfortable, low glare light. The housing and lamp compartment are fully recessed above the ceiling plane, minimizing lamp exposure. The perforated baffle and curved reflector produce a combination of direct and indirect light, fully illuminating the fixture housing.

The VOLT® LED High Bay Fixtures (VHB Series) are high-efficiency alternatives to traditional high bay fixtures used in indoor locations such as warehouses, manufacturing facilities, convention centers, big box retailers and more. All of VOLT’s LED High Bay fixtures ship with a motion sensor, reducing energy costs further by turning off light when spaces are not occupied. These are instant-On fixtures, not like typical ballasted high bays that can take up to 20 minutes to come to full power. The energy savings are tremendous. Three different beam patterns narrow (45°), medium (90°) and wide (120°) allow light to be directed on the desired surface.

Offered in three light output levels and 2’ or 4’ sizes, the Titan series is suitable for a broad range of applications such as stairwells, coves, garages, closets, restrooms and other areas where a clean looking, highly efficient LED light source is required. Selectable options include High Frequency motion sensor, High Frequency motion sensor with adjustable standby or Ultrasonic motion sensor with adjustable standby depending on your application needs. Ultrasonic sensors are ideal for stairwells and corridors where 360¢ª coverage can detect motion around barriers such as staircases, workspace partitions, shelves and other obstacles in the area. High frequency motion sensors can detect motion through many materials including glass, sheet rock walls, wood doors and the lens of a fixture, enabling the sensor to be hidden from view.

EarthTronics, dedicated to developing innovative energy-efficient lighting products that provide a positive economic and environmental impact, introduces two new energy efficient, High Output High Bay Fixtures featuring an integrated microwave sensor capable of providing daylight harvesting, step dimming and motion sensitivity to maximize energy savings. Available in 5000K with an 80+ CRI with a 50,000 hour performance life, the 105-watt High Output High Bay fixture provides 13650 lumens, while the 162-watt unit delivers 21060 lumens respectively. Both fixtures operate at 100-277 VAC and are equipped with a 0 – 10volt continuous electronic driver offering a dimming range capability of 0 to 100 percent. The two new High Output High Bay fixtures feature a new lightweight slim design, 24.8 inch by 15 inch by 2.2 inch, and come with hangers, chain and 6-inch cord for easy installation.

The Judge series provides vandal resistant construction at a cost-effective price point. These fixtures feature our lifetime warranty against vandalism and have been proven in thousands of installations over decades of use.

The SimpleSeal HASEDI Series, a recessed, IP65-rated luminaire designed for universal installation in 1” and 1.5” grid and flange ceilings, now features Indigo-Clean Technology. This revolutionary new technology provides on-demand disinfection that kills harmful bacteria, including Staph, such as MRSA.

The HBLC Series is a severe location LED highbay, specifically designed for use on heavy industrial bridge cranes. It is typically mounted on the bottom of the bridge crane to light the area shadowed by the bridge crane body. A yoke mount is used for strength and mounting flexibility. The HBLC Series, constructed of low copper alloy and die-cast aluminum, was successfully vibration tested at 3G for 30,000 cycles and meets the UL wet location standard.

With advanced LED technology, ACANEO, Waldmann’s high bay luminaire for full ambient illumination of large area facilities with ceilings of up to 100 feet, is designed with a modular mounting system that is quick and easy to install. The thermal heat management system is built-in to pull any heat up and away from the light source in order to prevent any overheating of the work or storage area as well as the fixture. Patented lenses offer precise and glare-free illumination for these expansive industrial spaces. The sealed, closed design and strong, aluminum housing are very effective in protecting the inside mechanics and electronics from dust, humidity, oils or vapors and is proficient in areas where temperatures reach up to 122° F. With 60,000 hours of maintenance-free operation (L80B10), ACANEO can boast time and energy-efficiency. Waldmann is offering ACANEO in three versions to enable a truly customized facility environment.

- 10” Cast Zinc Canopy

- Steel Trim w/ Satin Nickel Finish

- Off-White Butcher Linen Shade

- Mounting Hardware Included

Sporting an attractive and compact style, the industrial GP series from Williams offers a scalable footprint and variable outputs for high bay and low bay applications. Tailor performance with outputs up to 74,000 lumens and narrow, medium and wide distributions. Rated for 65„aC maximum ambient operating temperature for extreme environments.

The Super Max Confinement Surface Mount Luminaire is ideally suited for behavioral institutions and correctional facilities. Available options provide suitability for minimum to maximum security locations. Various materials and lumen outputs are available to satisfy nearly any conceivable institutional requirement.

The Super Max Confinement Wall Mount Luminaire is ideally suited for behavioral institutions and correctional facilities. Available options provide suitability for minimum to maximum security locations. A ligature resistant design is standard for all variations of the Wall Mount series. Various materials and lumen outputs are available to satisfy nearly any conceivable institutional requirement. 

"The Apex 13 LED fixtures build on the highly successful Anyx line. The cut-off, LED version features an upgraded, die cast, marine grade aluminum external trim, as well as an innovative twist-lock system. The Apex 13 series has been installed successfully in large scale projects such as dorm rooms, unsecured hallways, transportation stations and public schools. Natatorium finish is standard for all versions of this fixture."

The EXCELON® LED series of surface troffers are designed and precision engineered to meet the highest quality standard for today's discriminating specifier. The "RD" model features a ¨ý" extruded aluminum regress door with our LIGHT-LOCK™ technology. Additionally, the unit is now offered with the latest LED light engines in numerous lumen and color temperature packages. Options still include a wide choice of shielding media, as well as a variety of mechanical options to suit every project. Available in standard 2x2, 2x4, 16" wide and 12" wide configurations.

The Hazardous LED Vaportite Series is designed for manufacturing plants, chemical and petrochemical processing facilities, sewage treatment plants and dockside installations. Other ideal settings for the fixture include agricultural, commercial, industrial, mining and marine facilities. The series is suitable for Class I, Division 2, Groups A, B, C & D, and it is constructed of an extruded aluminum heat sink and a die-cast socket body containing an LED light engine with Cree high output LEDs.

LaMar Lighting's newest application for the popular Occu-Smart® line of motion sensor controlled lighting is parking garages. The GR/GS series feature cast aluminum housings, tough polycarbonate diffusers, and the Occu-Smart HF high frequency motion sensors, capable of detection through the diffusers with no exposed components. In bi-level or full on/off options, saving energy in parking garages just got a little "smarter".

LHA high bays are the economical standard for fluorescent high bay lighting with serviceability and performance that is unrivaled in the marketplace.

Featuring the distinctive fully-rotational OMNIVUE magnifier lens, this popular magnifier is now equipped with the latest LED technology. The 3 diopter (1.75X) magnifying lens, made from optical quality glass, tilts independently of the light source for optimum positioning. Three 3.5-watt LED modules provide the choice of two light levels with the touch of a switch. OMNIVUE LED also features precise positioning and now even longer lasting maintenance-free operation. Two optional Add-x lenses are available for additional magnification up to 15 diopters. Also, for longer reach applications, OMNIVUEMAX LED is available with a 43" extended reach arm; ideal for production benches and workstations. An optional pin mount for production workstations is available as well.

SWN LED Narrow Wrap Fixture is a durable fixture designed for surface mount applications including schools, offices and hallways. The SWN is available in 2x4 and 4x4 normal and high wattage to replace 2-lamp and 4-lamp normal and high power T-8s. This narrow LED wrap fixture is dimmable and features instant on. It is rated for 63,000+ hours with excellent lumen maintenance and comes with a five-year driver and LED board warranty.

Corelite’s R3 LED Series combines the technology of Cooper Lighting’s internally developed Linear LED Platform (ALM 1.0) with the high sense of style and superior brightness management that characterizes the Class R family. The proprietary low-power, glare-free LED platform delivers a soft, diffuse volume of pure white light that carries the general character of a fluorescent source while simultaneously eliminating unsightly socket shadows and the hassle of luminaire maintenance. In addition to the aesthetic advantage, a guaranteed system life of 50,000 hours combined with exceptional efficacy make the R3 LED Series the ultimate solution to satisfy the most stringent energy requirements. The R3 LED Series maintains its dedication to shallow plenum applications with a minimal 3-3/4" deep housing while continuing to provide optimal visual comfort with an ultra-light carbon footprint.

LSI's ultra-thin, edge-lit LED panel series (SFP) is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10v dimming capability. DLC, RoHS.

The Endeavor series is highly optimized for use in unattended stairwells by combining rugged vandal resistant construction with state-of-the-art sensor control. Included with integral occupancy sensor, the Endeavor is designed for rough environments including dormitory stairwells, hospital stairwells, hotel stairwells, and storage facilities.

The Blockade 58 series provides vandal resistant construction at a cost effective price point. These fixtures feature our lifetime warranty against vandalism and have been proven in thousands of installations over decades of use. 

The Swoop series features a durable, color-impregnated, polycarbonate housing supported by a marine grade, die cast aluminum base plate to provide a lighting fixture that will survive in many challenging environments. Natatorium finish is standard for all versions of this fixture.

The Vision 4 series features an all aluminum, ligature resistant construction and optional wet location listing which allows it to be used in nearly any environmental condition. Designed in conjunction with an opthalmologist, the polycarbonate lens provides complete control of glare and LED image while maintaining the high efficiency of clear optical material. The Vision 4 series can be row mounted to any length. Natatorium finish is standard for all versions of this fixture.

LSI's LED LPASC fixtures are low profile recessed direct/indirect 1x4, 2x2, and 2x4 troffers that deliver even illumination throughout a space. Their minimal design (3” depth) makes them ideal for those tight spaces. This recessed mount fixture has exceptional long life. The LED light source makes it virtually maintenance free. DLC, RoHS, UL listed.

Powered by (2) 1800 lumen high quality LED light engines, these fixtures provide over 3000 lumens at 45 watts with a standard color temperature of 4000k and a CRI > 80%. Our new LED troffers meet or exceed the light output of many standard fluorescent fixtures and offer energy savings of up to 33% with a rated life of 50,000 hours. Ideally suited for commercial applications such as offices, hospitals and schools, these luminaires offer the look of contemporary fluorescent lighting with the efficiency and low maintenance of LED technology. These units are UL and DLC listed and qualify for many utility rebates. Consult a LaMar Lighting sales representative today to learn more!

The Brilliante is an indoor commercial fixture. It works well in large indoor spaces such as office buildings and showrooms.

The slim profile, architectural ALH highbay is ideally suited for retail, large meeting spaces, gymnasium, commercial and other applications that normally utilize a traditional HID or linear fluorescent highbay. Designed for mounting heights up to 50', the ALH features precisely engineered LED light engines to deliver exceptional light quality and uniform distribution for any task. This 200 watt, 4' luminaire produces over 25,300 lumens and is suited for high ambient temperatures up to 50°C.

Foreverlamp has expanded their LED High-Bay Series with a new Industrial LED high-bay fixture designed to withstand wet, dusty and harsh industrial environments. The new HB Industrial Series fixture is IP66 rated and UL listed for wet conditions and provides a super high efficiency high-bay lighting solution with up to 30,000 lumens. The rugged, low-profile design is ideal for applications where oil, dust and water are an issue for lighting fixtures.

The Lunabay is a unique, patented LED highbay fixture for use in lighting large interior spaces such as retail stores and light industrial facilities. It can also be used for gyms and multipurpose rooms in schools. A key feature of the Lunabay is the uplight component. This lights and defines the ceiling, helping to eliminate the “cave” effect. The Lunabay’s distinctive optical system blends all 56 internal LEDs to produce color correct, low glare illumination.

The NutriLED is an energy-efficient LED horticultural light designed for plant growth. The fixture allows for multiple mounting configurations, and its unique optical design delivers controlled, uniform illumination optimized for plant growth. NutriLED’s perfect mix of red and blue wavelengths combined with light intensities for chlorophyll absorption means no energy is wasted producing spectrums of light the plant cannot use. Offering up to 88% energy savings over traditional non-LED grow lights, the NutriLED delivers enormous energy, maintenance savings and minimal waste. It can be utilized in applications such as commercial grow houses, research facilities and hydroponic growers.

Griplock® Rigging Grippers are re-useable and are in constant demand on movie sets, concert stages, at tradeshows, in theaters and on construction sites. Anywhere that instant adjustability, strength and reliability are paramount. Where it stops it locks®.

The Severe Vaportite LED Series is designed for manufacturing plants, chemical and petrochemical processing facilities, sewage treatment plants and dockside installations. Other ideal settings for the fixture include agricultural, commercial, industrial, mining and marine facilities. The series is suitable for Class I, Division 2, Groups A, B, C & D, and it is constructed of an extruded aluminum heat sink and a die-cast socket body containing an LED light engine with Cree high output LEDs.

Aleddra’s EasiFit® Troffer Retrofit Kit is an energy-efficient cost-effective replacement for an existing linear troffer luminaire. It fits into the existing troffer housing, thus saving the labor of removing it and the trouble of disposing it. At the same time, it provides a more aesthetic appearance than the old fixture. The 0-10V dimming makes it controllable by day lighting harvest system for further energy savings. The patented design of this kit makes it very easy for installation, without using any screws. The EasiFit Troffer Kit is UL/DLC certified for the utility rebate. The fixture comes with a 7-year warranty. The 10-year warranty is optional at an incremental price.

The New Blizzard EXT offers more versatility and benefits than any other weatherproof enclosure offered. This fixture has been carefully designed with a new Rigid Mounting Beam to offer secure ceiling or dual pendant mounting options. With its patent pending Heat Management System the New Blizzard EXT can run up to 13° C cooler than the original Blizzard, finally offering an enclosed 6 lamp T5 fixture for a wide range of warehouse applications.

The Lightwatt LED luminaire is a lowbay fixture that provides comfortable, high efficiency illumination on vertical and horizontal surfaces. It is ideal for warehouses, shipping docks, stairwells and low ceiling areas. The Lightwatt LED refractor provides spacing to mounting heights up to 1.3:1 and projects light into, underneath and between industrial obstructions like HVAC ducts and electrical raceways. Lightwatt’s photometric distribution provides more than 7% uplight to soften the brightness difference between the luminaire and the surrounding areas and provide a three-dimensional luminous environment.

The Aria series features a durable, color-impregnated polycarbonate housing supported by a marine grade, die cast aluminum base plate to provide a lighting fixture that will survive in the harshest environments. The fixture has been installed successfully in large scale projects such as dorm rooms, unsecured hallways, transportation stations and public schools. Additionally, multiple colors and trim options are available to compliment nearly any architecture. Natatorium finish is standard for all versions of this fixture.

The newest addition to Legion's popular Duolume line is the shallow 2x2 and 2x4 center basket value series. Redesigned to have more options in lumen packages and in color temperatures, center diffusing mediums and other options at a very competitive price.

Cooper Lighting has introduced a series of Metalux retrofit kits that not only provide energy savings, but improves lighting quality and aesthetics, resulting in a more inviting, productive and stylish work environment. The Commercial, OpticaHP, Archos™ and Cruze™ retrofit kits feature architecturally inspired designs to update a build’s look and value while keeping the existing housings, reducing renovation and disposal costs. Cooper’s Advanced Retrofit Technology™ provides a wide range of features and benefits that save energy, time, labor and money when compared to similar offerings. These features include WhiteOptics™ reflectors, which improve light output, quality and distribution, and Ready-Set™, a patented captive and stable screw design for quick and easy installation without the need for a parts bag. The unique design of the kits allows seamless fit into most competitors’ luminaires. Available in 2’ x 2’ and 2’ x 4’ sizes with T5/T5HO and T8 lamp options, these kits can offer up to 62% in energy savings over standard 3 or 4 lamp T12 luminaires or up to 40% in energy savings over standard 3 or 4 lamp T8 luminaires with minimal reduction in lumens.

EnviroPro™ EPMP sealed top access LED luminaire for insulated metal panel ceilings reduces overall operating costs three ways. Reduce the number of luminaires needed, cut input watts and lower cooling costs. EPMP is an IP rated, sealed LED high- output, topserviceable 16”× 20” luminaire that can reduce your IMP ceiling cutout by 40% while protecting the integrity of Insulated Metal Panel (IMP) ceilings.

The Form series features nearly unlimited architectural flexibility while maintaining maximum vandal resistance. The all aluminum body construction and optional wet location listing allow the Form series to be used in nearly any environmental condition. Natatorium finish is standard for all versions of this fixture.

Eaton Lighting, a leader at the forefront of transforming the lighting industry and setting an unmatched standard for innovation and reliability, is pleased to announce the addition of the Metalux ArcLine™ LED Series to its family of architectural recessed luminaires. This shallow plenum line of 1' x 1', 2' x 2', 2' x 4', and 1' x 4' luminaires blends modern architectural styling with an innovative optical design to deliver leading-edge performance, long life, and energy savings in excess of 45 percent over standard fluorescent troffers. The series is an ideal choice for commercial office spaces, schools, hospitals, and retail merchandising areas where soft, glare-free, ambient illumination is desired.

Aleddra’s LED Canopy Luminaire is an energy-efficient cost effective replacement for an existing traditional canopy luminaire. It’s built with top of the line LEDs and the reputable Meanwell driver, which means fewer maintenance costs. Its IP65 rating makes it ideal for wet locations. The canopy light uses aluminum die-casting heat sink and exterior, which provides efficient heat management and a sleek, aesthetic appearance. Aleddra Canopy Light is ETL certified and meets DLC requirements. It comes with a 5-year, 50,000 hour warranty. The application is ideal for gas station canopy lighting applications.

The Margherita Industry is a decorative glass pendant that is a nice way to add decor to an industrial space.

The Vertex series combines sophisticated optical performance with an economical, durable, steel construction that is typically used in applications where durability and price are both equally considered. Successful applications have included public schools, airports, industrial facilities and public rest areas. The Vertex series is also available with energy saving occupancy sensors and can be continuous row mounted as needed.

The HT1 Series is a line of high-output LED fixtures with a recessed troffer design and high bay performance. The HT1 Series was designed for high ceiling applications that require superior lumen output, ultra-long life, high quality of light and beautiful aesthetics. It is available in 2x4 and 2x2 form factors. The HT1 Series is perfect for automotive showrooms, big-box retailers, convention centers, schools, indoor sports arenas and warehouses.

The XHB3 meets the challenges that are presented in lighting cold storage applications and it is the ideal fixture for various types of climate controlled applications (25°C). Designed for industrial, retail and commercial interiors, the XHB3 offers you a fixture that can deliver a whiter, brighter light that will increase energy efficiency and reduce monthly energy costs when compared to traditional lighting. Fixture offers standard 5300K color temp with 70 CRI and Available in two arrays; 104 LED’s utilize 160 watts with 13,000 total lumens. 128 LED’s utilize 197 watts with 16,000 total lumens.

The Tenda is a decorative commercial pendant available in both aluminum and glass finishes that looks best in large indoor spaces.

The Super Max Confinement Recessed Luminaire is ideally suited for behavioral institutions and correctional facilities. Available options provide suitability for minimum to maximum security locations. Suitable for both concrete pour and grid ceilings, the Super Max Confinement Recessed Series features a convertible door. In the event of product misordering, a flange kit can be purchased seperately to adjust grid to flange setup in the field. A ligature resistant design is standard for all variations of the Recessed Mount series.

The Hazardous Lightwatt LED luminaire provides comfortable, high efficiency illumination on vertical and horizontal surfaces and is ideal for all low mount classified areas. The Lightwatt LED refractor provides spacing to mounting heights up to 1.3:1 and projects light into, underneath and between industrial obstructions such as HVAC ducts and electrical raceways. Lightwatt’s photometric distribution provides over 7% up light to soften the brightness difference between the luminaire and the surrounding areas and to provide a three-dimensional luminous environment.

The TLED-LVT is a LED Linear Vapor Tight series combining state-of-the-art technology into a robust IP66 rated vaporproof housing. The LED light engines produce up to 97 lumens per watt. The durability and versatility of the purpose designed vaporproof housing allows this linear LED luminaire to perform in a wide variety of applications in both indoor and outdoor environments. This quad-proof fixture is waterproof, dust proof, corrosion proof and vandal proof. Utilized in applications from simple direct replacement of a traditional 2-lamp T8 linear fluorescent luminaire to complex underground parking facilities where motion sensing makes the most sense.

- Luminous White Acrylic Diffuser, Aluminum Mounting Pan & Stems with Black Powder Coat Finish

- 120V is Energy Star Certified

- 120V Drivers Are Dimmable, 277V Drivers Are Not Dimmable

- Over-Current, Over-Voltage,and Short Circuit Protection

- ADA Compliant, CSA Listed Damp Location, Mounting Hardware Included, LED Light Fixture

2-Lamp, energy efficient, enclosed and gasketed lighting suitable for wet locations.

Waldmann’s ROCIA.planar rugged task luminaire shares the same strong, reliable qualities of the ROCIA.focus but with a wider, flatter light source more appropriate for workbenches, desks, or other work surfaces. Featuring an equally strong aluminum and impact-resistant screen, 3D head joint, high illuminance and outstanding light quality guarantee ergonomic comfort and glare-free, dependable light meeting the highest standards. The integrated power supply unit allows the ROCIA.planar to be connected directly to a 100–240V AC power supply.

- Die-Form Cold-Rolled Steel Housing w/ Brushed Nickel Plated Finish

- Steel Trim w/ Brushed Nickel Plated Finish

- Steel Canopy & Stems w/ Brushed Nickel Plated Finish

- Over-Current, Over-Voltage,and Short Circuit Protection

- Lamps and Mounting Hardware Included

One of Bock’s most popular products, the BGL, is an indoor commercial fixture. Its size and style make it a great addition to any large indoor industrial space.

With advances in LED technology Legion Lighting is excited to bring our re-engineered flat panel to market. We have two new series, the Panelume EX at 125 lumens per watt, standard 0-10V Dimming and at a very competative price in 2x2 and 2x4 configuarations. And building on the popularity of our color changing LED under-cabinet light, the 112 series, we have the Panelume CC series that uses a pair of A/B switches in the driver compartment to adjust the color temperture from about 3000K to 5000K. The CC is great for stocking distributors, just one panel to stock for three color tempertures. And DLC listed.

The first Double Ended 4-way Horticultural Reflector suitable for both indoor and greenhouse applications. Flexibility within the unit, combined with end user functionality, makes this product one of a kind. The patented Concealed Vacuum Airflow Technology® maximizes the reflector’s photometric performance and thermal dissipation. ETL listed, HDE works with 315W & 1000W DE lamps and includes a removable 1/8″ thick tempered glass door for optional fully sealed air-cooled and non air-cooled operations. The open rated full spectrum 315W CMH lamp provides a proven energy-saving alternative to LED.

Available in 12”, 16” and 22” diameters, Prisma features a diffused prismatic refractor or aluminum reflector making it a versatile choice for numerous applications. Light output ranges from 1,000 delivered lumens all the way up to 19,000 delivered lumens from 22” models.

Griplock’s lower cost ZF Standard grippers are competitively priced for use in industrial and architectural lighting applications. ZF Standard grippers offer instant and precise height adjustability, while radically reducing installation time and eliminating human error.

The SenScape™ SPG18 has a slim, aesthetically-pleasing profile for parking structures, canopies and low bay applications, including loading docks, high-ceilinged office, industrial, commercial and retail spaces. This unique design provides the best lumen-per-watt and uplight combination available with Kenall’s trademark glare control: the IP65/IP66 ratings also protects SenScape from the ingress of dust, dirt, debris and water.

- Steel Housing w/ Textured Black Polyester Powder Coat Finish

- Aluminum Heat-Sink Plate

- Solid Top & Bottom End Plates

- ADA Compliant, CSA Listed Wet Location, LED Light Fixture, Mounting Hardware Included

4- or 6-Lamp IP67 rated NSF rated and 5VA fire rated low/high bay ideal for cold temperatures.

Lamar Lighting's Bianca OS series is the newest addition to the popular Occu-Smart® line of motion sensor controlled bi-level lighting. In response to requests from designers requesting a low glare wall mount stairwell and corridor unit, the Bianca series is available in 2', 3' and 4' lengths and T5 and T8 lamping with Lamar's patented Occu-Smart® technology and offers adjustable standby light levels with energy savings during un-occupied periods and instant full light output upon occupancy. Models are also available with full on/off ultra sonic sensor control, passive infrared sensors for use in restrooms, and daylight sensing. Several perforated metal face options and non-sensored units make the Bianca series additionally suited as a patient bed light offered with up/down switching and optional custom paint finishes, along with Sanipull cleanable vinyl pulls for the switches.

LGI does it again with the Acrylic Series LED Low-Bay/High-Bay luminaire, with 10,500 Lumens of illumination performance to allow one-for-one replacement of 320W to 400W HID luminaires and multi-lamp fluorescent fixtures. Using a CREE COB powered by a Meanwell driver this fixtures features exceptional rated lifetimes, a stable lumen output while offering zero restrike time and a sleek design. The Acrylic Series also provides additional benefits of energy savings and significantly reduced relamp maintenance costs.

Waldmann Lighting introduces MACH LED PLUS.forty – the newest addition to the MACH LED PLUS family of LED machine lights. This slim, compact fixture measures just 1 ¾ inches in diameter, is available in four lengths, and four output levels with options of a 40° narrow or 90° wide beam angle. High LED light output, even on the smallest models, delivers maximum lumens in the smallest spaces. A choice of mounting brackets allows for even more control of the light direction, increasing the possibility to customize light to machine. Constructed of solid aluminum housing and 4mm thick safety glass, MACH LED PLUS.forty is highly resistant to coolants, lubricants, high temperatures, shocks and vibrations – any harsh environment prevalent in today’s machining. Integration and connection are easy with an M12 connector (included), and various models allow for thru-wiring, if desired. MACH LED PLUS.forty offers 60,000 hours of maintenance-free operation that is both energy and cost efficient to help keep busy machining environments running smoothly.

The LS1 Series provides versatility and great performance in a thin profile, available in 3,000, 4,000 and 5,000 lumens per 4-foot section. LS1 installation is fast and easy, saving both money and time for contractors, installers, and end-users. Its Sensor Anywhere technology provides the ability to place one or several occupancy sensors anywhere along the run. One sensor gives the option to control the whole light row or just a section of it. By installing multiple sensors, the user can create groups and control them independently, allowing them to create lighting scenes and maximize energy savings.

The KHL III LED is a hazardous location fixture that builds on the Kemlux III Series with a high performance LED option. It shares all of the mounts with the HID Kemlux III and can be retrofitted to existing HID Kemlux III fixtures if the T-Code and the current draw are compatible. Low copper alloy castings, polyester powder paint and stainless steel hardware make for a fixture that will perform very well in high corrosion environments. The finned design allows the sealed fixture to correctly operate from -40°C to +40°C.

With a vast assortment of ultra-minimal housing profiles that can accommodate T5/T5HO/T8, CFL or incandescent lamp sources, WP SYSTEM Specification Grade Strip fixtures are the perfect choice when less is best. Choose from many styles, including: side mount, diagonal, adjustable staggered, low-profile, mini-profile and more. Whatever your specification requires, WP SYSTEM fixtures can deliver strong light while providing high quality, durability and value to any interior commercial, architectural, residential or retail project. Various reflectors, acrylic lenses and dimming capabilities complete the make-up for one of our most popular and enduring product lines. Quick Ship available for most WP SYSTEM fixture models.

The Vault series provides vandal resistant construction at a cost effective price point. These fixtures feature our lifetime warranty against vandalism and have been proven in thousands of installations over decades of use.

High-efficient direct illumination panels provide greater color accuracy with no discoloration over time EarthTronics, dedicated to developing innovative energy efficient lighting products that provide a positive economic and environmental impact, now offers a high energy-efficient Direct Illumination LED Panel Series delivering 4000 lumens using only 40 watts to replace troffer and panel fixtures in existing and new construction ceiling applications. Available in 1X4, 2X2 and 2X4 panels in 4000K and 5000K bright light with smooth dimming and a high color rendering of 80+, the Direct Illumination Panel Series maintains its color consistency with no discoloration over time, providing even illumination with a 120° beam angle.

The LHB Series delivers high efficacy, high-output LED lighting with up to 70% energy savings over traditional HID or fluorescent technology. Applications include commercial, gymnasium, industrial, large meeting spaces, manufacturing, retail, warehousing, and other applications that utilize a traditional HID or linear fluorescent high bay with mounting heights up to 50’. This product is offered in a 2’ by 2’ size for the 105w model, and a 2’ by 4’ size for the 200w and 320w models. The LHB series is also available with 347/480VAC, battery backup and occupancy control options.

- Steel Housing & End Caps with Matte Silver Powder Coat Finish, High Impact White Acrylic Diffuser

- Steel Reflector Plate with Powder Coat Finish

- Mounts Directly to Wall or Ceiling with Four Wall Anchors (Not Included)

- ADA Compliant, CSA Listed Damp Location For Wall And Ceiling Mount, Integral EB Available, LED Light Fixture

The KH III LED Floodlight builds on the Kemlux III Series with a high performance LED floodlight option. Low copper alloy castings, polyester powder paint and stainless steel hardware make for a fixture that will perform very well in high corrosion environments. The finned design allows the sealed fixture to correctly operate from -40°C to +40°C. The lighting task is done with three available LED counts and three optical distributions. All are high efficacy with the best at 105 lumens per watt.

The Sonar 4 series features nearly unlimited architectural flexibility while maintaining maximum vandal resistance. A wide variety of grill configuartions, colors and lengths are available which can be combined in nearly unlimited ways. Furthermore, the all aluminum body construction and optional wet location listing allow the Sonar 4 series to be used in many environmental conditions. Natatorium finish is standard for all versions of this fixture.

Linear LED is now available in confinement fixtures from Fail-Safe. Possessing comparable size and lumen output of T8 lamps, the Linear LED fixtures feature a variety of lumen packages and color temperatures (4000K and 5000K) and 50,000+ hour operating life. Energy efficient and environmentally conscious, the fixtures are designed for confinement applications.

The Square8 is a Housing/Lens combination providing exceptional glare control and a wide distribution. The rounded-square shape of the Square8 ensures good impact strength with a pleasant appearance. The upper housing is made from high impact white polycarbonate suitable for dissipating 26w at 40ºC (depending on mounting style and driver). The enclosure is IP66 rated. A knock-out on each side accommodates conduit, occupancy and/or wireless sensors. Knock-outs on the top provide mounting to standard J-Boxes. Integral or installed gaskets are options.

Kenall’s SimpleSeal™ Amber Series features 570nm Phosphor-Converted (PC) amber LED light, which helps prevent negative outcomes resulting from overexposure to light. It provides visual acuity for detailed tasks without the damaging effects of white light to light-sensitive products and processes.

The Griplock® Seismic Bracing System conforms to California Building Code regulations. During a seismic event, forces can quickly build up that may cause a lighting fixture to tear loose from its ceiling mountings. The Griplock® System is designed to limit such movement, not prevent it altogether.

Millenium™ Rounds are constructed with the finest materials available, ensuring they will maintain their looks and performance for years to come. They are available in several configurations with many optional features, including embedded motion sensors. This provides a versatile blend of aesthetics and performance that allows designers to use Millenium as a thematic design element throughout a project, from a single building to an entire campus.

The EnviroPro EPHB Series incorporates best practices, including uplight options of 8% or 11% (standard is <1%) resulting in industry-leading, high vertical illumination. Designed for ceiling heights of 18’- 50’, its high lumen output provides desired light levels for even the most critical tasks.

Waldmann Lighting adds an impressive new LED spot light to their extensive collection of machine lighting solutions. ROCIA.focus has a strong, full-metal design constructed from rugged aluminum with completely sealed housing, handily preventing any intrusion of liquids, dust or foreign objects that are ever-present in machining environments. Available with articulating and gooseneck arm styles as well as a pivoting head version, all offer a choice of either 10 or 40 degree beam angles. The spring-balanced joint and arm mechanics of ROCIA allow for flexible and dependable positioning and adaptability wherever it is used, directing light with utmost precision exactly where it is needed. ROCIA’s specially designed optics and high-powered LEDs provide illuminance of up to 30,000 lux with a bright 5000K color temperature adding glare-free light and clarity to the machine area. The fixture feature switching on/off operation or programmed for continuous dimming allowing you to reduce the lighting level to a flicker-free level. The broad-range electronics and integrated transformer of the ROCIA.focus provide a constant light output in a supply voltage range of 12–28V AC or 12–40V DC. Arm-mounted and flexible-tube luminaires are also available with integrated power supply unit, allowing them to be operated directly and without plug-in power supply unit on 100-240V AC. In addition, this new technology and electronic capacity boasts up to 90% in energy savings when compared to similar halogen machine lights.

ELP’s AK, AKTB and AKS Series luminaires are now available with LED options in very high lumen packages. These high performance wall wash fixtures out-perform 50 watt fluorescent lamp units at less wattage. They are available for Gypsum, T-Bar and Surface/Pendent Mount installations. Shallow depth of 3-1/2½ allows wall installation in a standard 2” x 4½ stud wall to wash the ceiling or floor with light. The formed, high purity aluminum reflector provides even, unscalloped illumination with no glare. Indirect optical design shields the LEDs from sight at any viewing angle while yielding a fixture efficacy of 89. The 2’ fixtures may be ordered as #444W1WW-AKTB2 with over 4300 lumens consuming only 44 watts. If more light is required, the 4’ fixture #888W1WW-AKTB can provide over 8700 fixture lumens at 88 watts. They utilize Sylvania’s 11 watt distributed array LED modules that are 80+ CRI and rated up to 60,000 hours. Available color temperatures are 3000K, 3500K and 4000K. These luminaires have a linear LED system that surpasses the light output of fluorescent options while using less power. LED fixtures are supplied standard with dimming. Sylvania provides a 5 year warranty on the lamp and driver combination when utilizing their LED driver.

The Super Max Confinement Surface Mount Luminaire is ideally suited for behavioral institutions and correctional facilities. Available options provide suitability for minimum to maximum security locations. Various materials and lumen outputs are available to satisfy nearly any conceivable institutional requirement.

The LED Highbay Series is a heavy industrial, cast aluminum highbay that efficiently lights any large interior space, including heavy industrial settings, warehouses, gyms, churches and shopping malls. It has a high performance LED design and a delivery of up to 100 lumens per watt of 5000 deg K light. The unique radial design with fins of durable cast aluminum allows it to operate in -40˚C to 55˚C ambient environments and keeps the LEDs cool resulting in an estimated 100,000 hours of life at L70. Nine unique fixture versions are available for a wide variety of applications.

Kenall’s MightyMac SDSA Series are slope-sided LED luminaires with staked and welded external piano hinges. They are made to resist damage and attempts to conceal contraband materials, and are ideal for use in cells, dayrooms, cafeterias, restrooms, showers, corridors, sally ports and indoor recreational areas.

LGI does it again with the NeroLume Series LED Low-Bay/High-Bay luminaire, with 11,300 Lumens of illumination performance to allow one-for-one replacement of 320W to 400W HID luminaires and multi-lamp fluorescent fixtures. Using a CREE COB powered by a Meanwell driver this fixtures features exceptional rated lifetimes, a stable lumen output while offering zero restrike time and a sleek design. The NeroLume Series also provides additional benefits of energy savings and significantly reduced relamp maintenance costs.

Modern refinement, high efficiency and versatility are the definition of CHLOE - our latest 4.75" round linear suspended luminaire. CHLOE's streamlined outer profile encases the precision-engineered interior underpinnings of a strong powerhouse fixture. High efficiency reflectors coupled with the "NL" No Lens option can achieve 90% efficacy for the most demanding projects. Multiple lamp distributions and lens effects offer exceptional versatility for applications such as: open-plan offices, corridors, libraries or health facilities. Available with LED or fluorescent light sources.

HSE horticulture luminaire combines a single-ended mogul base HID lamp with an efficient economical design. HSE is the smallest footprint light on the market suitable for all 315-1000W lamps. Convex technology positions the lamp’s arc tube just above the reflector’s horizontal plane, allowing the lower portion to spread lumens evenly with intense coverage. The open rated full spectrum 315W CMH lamp provides a proven energy-saving alternative to LED.

Indigo-Clean, a continuous disinfection technology, is patented and proven to kill harmful bacteria linked to hospital acquired infections (HAIs). Using a combination of 405nm Indigo and White LEDs, Indigo-Clean emits narrow spectrum light that kills bacteria while providing ambient illumination forthe space. Unlike UV light, Indigo-Clean uses safe, visible light to automatically and continuously kill harmful bacteria in the air, and on hard and soft surfaces.

The AW LED Series is an obstruction light that utilizes unique optical, electrical and mechanical design. AW LED is the most universal, compact and efficient obstruction light in the world. It is ETL certified to the FAA requirements and available as a complete single fixture or as a direct replacement of incandescent lamp/lens technology. Features include corrosion-resistant lamp assembly and housing, resistance to shock and vibration and self-contained wiring compartments that eliminate additional boxes.

Kenall’s SimpleSeal™ Red Series features 630nm red LED light, which provides consistent, controllable red light to support the natural circadian rhythms of laboratory animals in research environments. Studies indicate that the timing and duration of light and dark cycles (called a photoperiod) influences the body weight and food intake of laboratory animals. It also can induce a shift in the circadian rhythms of blood pressure, heart rate and activity.

Industriale Series — a collection of decorative architectural fixtures with a vintage-industrial appearance. This product family includes four shade styles that can be custom painted to complement any decor, various mounting options including bail with wingnut, and wire cage and glass lens accessories are available. It is perfect for loft or office spaces, retail stores, and restaurants. The maximum lumen output for this series is 10,000L. The driver is located in the canopy, or in the CentralDriveTM version, the drivers and the control electronics are located in a central panel. This makes installation and maintenance more economical.

Lighting in today’s educational facilities goes beyond the classroom. From lecture halls and corridors to gymnasiums and parking lots, Williams offers the full lighting package. Proper illumination improves student performance, increases alertness and enhances overall well-being. With a vast product portfolio including dynamic lighting and connectivity solutions, our luminaires are engineered to meet the most demanding environments and designed to deliver a personalized level of light control.

Kenall’s MightyMac RMCD Series are recessed, LED luminaires with completely concealed internal piano hinges. They are made to resist breakage and breaching. The RMCD offers an Indigo-Clean Technology option to add to kill harmful bacteria, such as Staph, including MRSA. Tunable white technology is also available to control color temperature and intensity of light. Both are ideal for use in cells, dayrooms, cafeterias, restrooms, showers, corridors, sally ports and indoor recreational areas.

The HBLH Series Hazardous LED Highbay is a classified fixture ideal for lighting classified areas in heavy industrial settings and warehouses with its high performance LED design and delivery of up to 100 lumens per watt of 5000 deg K light. The unique radial design with fins of durable cast aluminum allows it to operate in -40˚C to 55˚C ambient environments and keeps the LEDs cool resulting in an estimated 100,000 hours of life at L70. The HBLH Series offers nine unique fixture versions for a wide variety of applications.

Eliminate the necessity of building an architectural cove with NATHAN: our sleek, extruded aluminum wall mounted cove lighting luminaire designed to dissolve into any interior design-scape while still delivering a strong kick of smooth and even forward-throw illumination. The strength of the heavy duty extruded aluminum body coupled with 1/4" machined end-caps, helps to insure straight and easy installations on the job site. NATHAN is suitable for general interior lighting applications, such as: Corridors, Offices, Conference Spaces, Commercial, Healthcare, Institutional, Retail, Hospitality and Restaurants.

Sentry Elite® LED combines the benefits of LED technology with the features OEMs have come to rely upon in the flagship Sentry series. Sentry Elite LED utilizes gear tray internal construction for cost effectiveness and functional practicality by minimizing required internal metal components. Drivers mount to the driver tray for thermal isolation. The Sentry Elite housing is sealed against dust and moisture and available in a variety of lens, latch, and wire-entry configurations.

The Metalux Commercial, OpticaHP, Archos™ and Cruze™ retrofit kits consists of architecturally-inspired designs that update a building’s look and value, while offering a wide range of features and benefits that save energy, time and money when compared to similar new construction T8 or T5 luminaire offerings. Additional contractor-friendly features include pre-wired ballast and assembly, no parts bag, and fast, easy installation in less than 10 minutes. These new retrofit kits fit into most existing luminaires and can upgrade troffers and parabolics as shallow as 3-1/2 inches. Available in 2' x 2' and 2' x 4' sizes with T5/T5HO and T8 lamp options, these kits can provide up to 60 percent energy savings over standard three- or four-lamp T12 or T8 luminaires.

Aleddra’s linear luminaire features a stylish design and a slim profile, and is designed for any indoor lowbay or highbay application. It saves 70% energy as compared to existing highbay fixtures and comes with 5-year warranty.

HL Series is a collection of decorative architectural products that include cylinders, luminous cylinders, and pendants. This series will support a wide range of lighting design requirements, delivering a cohesive look for any space, and ensuring consistency in quality and performance. It includes 42 fixtures, available with either a Deco-style exposed heatsink or a smooth housing. These high-performance products offer a broad range of lumen outputs and 24 different dimming options. The common fixture housings makes it easy to mix and match fixture sizes and types, while maintaining a high-end uniform look – ideal for small intimate spaces to grand ballrooms.

The HBLHA LED Highbay is a severe location fixture capable of withstanding high temperature environments. It is rated for usage in large interior settings up to 65°C. This fixture builds from the solid platform of the HBL LED Highbay and maintains all of the performance features, such as 100,000 hours at L70, up to 100 lumens per watt from the unique Hubbell designed optics and narrow, wide or aisle distributions. The HBLHA also maintains the three LED counts of 48, 60 and 72 to allow three different light levels.

ConTech is pleased to announce our new High Bay Series! Ideal for high ceiling applications such as warehouses, large retail environments, and storage facilities. The Champion Series High Bay is available in two (2) wattage packages: 200W/22,000 Lumens and 240W/28,000 Lumens. Utilizing custom optic lensing, the Champion series is available in three different beam distributions: 45, 90, and 120 degrees. Optional motion sensor offers field adjustable detection zones, hold time, stand-by, dimming level, and daylight sensing.

Lamar Lighting’s award winning Occu-Smart® series of motion sensor controlled bi-level lighting is now available in several new economical fixed bi-level options. The VOB series is equipped with fixed output ballasts controlled by the ultrasonic sensor and a single F17T8 lamp for standby lighting. Other options include bi-level ballasts with either 10% or 40% standby levels (selected at time of order) for one or two T8 lamps in 3 or 4’ lengths. With standby wattages as low as 6 watts for one F25 T8 lamp, these new options greatly expand the Occu-Smart® family of sensor controlled lighting. All units feature Lamar Lighting’s patented 100 hour lamp conditioning circuit and are available with emergency battery backup.

The Mini Lunabay is a unique decorative lowbay fixture with mid-range LEDs and four optic options. It is designed for use lighting interior spaces such as retail stores, light industrial facilities, gyms and multipurpose rooms in schools. The Mini Lunabay’s uplight component lights and defines the ceiling without a “cave” effect caused by 100% direct illumination. The fixture’s unique optical system mixes the light of each LED component; therefore it produces color correct, low-glare illumination.

Griplock® suspension systems utilize 7x7 stainless steel and galvanized aircraft cable with a factory-fitted terminal, allowing the cable to be attached to structure via a cable coupler. Griplock® aircraft cable is available in diameters ranging from 1/32” to 5/16”.

EarthTronics, dedicated to developing innovative energy-efficient lighting products that provide a positive economic and environmental impact for its customers, combines energy-efficiency and aesthetics to introduce new architecturally-designed square and round LED Mini Panel LEDs for a wide range of lighting applications. Ideal for use in offices, schools, residential, healthcare facilities and a variety of commercial settings, the Mini Panel LEDs from EarthTronics feature an impact-resistant acrylic lens designed to achieve a wide light distribution pattern with exceptional color quality in attractive architectural frames. The panels also have a wet-location rating that make them a perfect option for hotel and hospital bathroom showers. With a 50,000-hour rated life, the Mini Panel LEDs operate on 120VAC 60 Hz and are compatible with standard incandescent dimmer controls, providing even dimming from between 5 and 100 percent. The panels are available in 5.5, 7 and 9 inch square and round designs ranging from in 11, 14, and 17 watts producing 700, 900 and 1200 lumens. The 3000K and 4000K models also boast an impressive 90+ CRI.

The Anyx 13 LED fixtures build on the highly successful Anyx line. The Anyx 13 series features a durable, color-impregnated polycarbonate housing supported by a marine grade, die cast aluminum base plate to provide a lighting fixture that will survive in the harshest environments. The Anyx 13 series has been installed successfully in large scale projects such as dorm rooms, behavioral health facilities, transportation stations and public schools.

Griplock® provides a full line of cable suspension kits for the architectural lighting market. Whether you’re suspending single-pendant, multi-pendant or linear fixtures, Griplock® Architectural Suspension Kits provide quick, easy, and reliable tool-free, fully adjustable suspension.

The new CH1 Series is a range of High Bay LED fixtures with features contractors value the most: quality, reliability and performance in a cost-effective design. The CH1 Series takes our award-winning technology from the Essentials Series 4.0 and puts it into a more value-centered platform. Models available with 2, 4 and 6 LED modules to deliver a lumen range from 6,000 to 35,000 lumens, up to 171 lumens per watt and an ultra-long life up to 201,000 hours (L70 via TM-21). This product line is great for industrial and manufacturing facilities, warehouses, distribution centers, hangars and indoor sports.

Solerio fixtures are suspended LED downlights used for general illumination in medium- to high-ceiling applications such as offices, malls and retail spaces. The cylindrical housing is constructed of satin anodized aluminum extrusions, finned for optimum heat dissipation. Chrome plated steel decorative rods support decorative elements while projecting a rugged industrial appearance of the fixture. The prismatic UV stabilized acrylic refractor is slight frosted producing a soft diffused illumination. Optional lenses are available to enclose the fixture, secured with metal clamp band. Custom colors upon request.

The Roo Industry is a decorative commercial shade with an aluminum spun reflector. It creates a more industrial look to indoor spaces such as offices and restaurants.

The High Output HBL LED Highbay lights any large interior space, such as industrial settings, warehouses, gyms, churches, swimming pools and shopping malls. The 72 high power LEDs are driven at 920ma for lumen outputs up to 21,000 lumens. The unique radial design with fins of durable cast aluminum allows it to operate in -40˚C to 40˚C ambient environments and keeps the LEDs cool, resulting in an estimated 100,000 hours of life at L70.

EarthTronics, dedicated to developing innovative energy-efficient lighting products that provide a positive economic and environmental impact, introduces its new line of contemporary LED Troffer Series for office, healthcare, retail and many other commercial applications for new construction and retrofit projects. Designed to install in 2’x2’ and 2’X4’ grid ceilings, the troffer fixtures from EarthTronics are available in 4000K and 5000K with a high 80+ CRI. The 2’x2’ 30-watt LED Troffer provides 3780 lumens, while the 34-watt 2’x4’ 34-watt LED delivers 4289 watts. With a durable white finish on a slim design and a 50,000-hour performance life, the Troffers feature 120/277V dual operation. They are equipped standard with a 0 – 10-volt continuous dimming driver with a dimming range capability of 10 to 100 percent. An optional emergency light battery pack and driver is available.