Steel Housing • Hinged front access panel • Corrosion-resistant baked enamel white or black finish • 2 lighting heads • Various choices of lighting head styles and lamp types • Ceiling or Wall Mount • 1/2” conduit knock-outs • Improved Diagnostics is standard • Red charger monitor LED indicates charging of the battery • Amber AC-ON LED indicates AC power is on • Momentary test switch allows for quick operational check of entire system Choice of Sealed Maintenance-Free Battery • 6V or 12V Lead-Calcium battery • 6V or 12V volt, Nickel-Cadmium battery • UL 924 Standard
NEMA-4X Rated and UL Listed for Wet and Damp Locations • 5-year limited warranty • NEMA-4X rated for wall or ceiling mounting only • Rugged polyvinyl chloride body will not dent, peel, rust or corrode. • The sealed faceplate is constructed of vandal-resistant polycarbonate. • The fully gasketed faceplate is fastened with stainless steel tamper-resistant screws. • Magnetically operated test switch. • Models can be wall, or ceiling mounted. • Legend and chevron complies with ULrequirements. • It is unaffected by the vibrations, ambient temperature swings and typical power surges. • UL924 Listed. • Listed for wet / damp locations 50°F to 104°F (+10°C/+40°C)
ISD Series Battery Packs from IOTA Engineering provide emergency operation for linear and fluorescent lamps. ISD Emergency Battery Packs provide 1300 lumens of emergency illumination, and automatically conduct the 30-second monthly and 90-minute annual tests required by code. If the ISD Emergency ballast encounters a problem with the lamp, charging circuit, or inverter circuit, the unit will signal an alert via a flashing indicator light and audible beep.
The UFO-LED 25 Series is a battery pack inverter designed to work in tandem with an AC ballast to power LED luminaires in the event of interruptions or failures. Eliminating the need to install additional emergency lighting units, the UFO-LED will operate the LED luminaire at full lumen output continuously for 90 minutes during an input power interruption. The unit contains a solid-state charger with an automatic transfer circuit, a LED charge indicator light and a high temperature Nickel-Cadmium battery.
EarthTronics, dedicated to developing innovative energy efficient lighting products that provide a positive economic and environmental impact for its customers, introduces the new LED Direction Adjustable Wall Pack series to provide exterior, wide-flood area illumination for commercial, industrial and municipal facilities. Available in 20, 30 and 70 watts, in both 4000K and 5000K color of light, the new EarthTronics Direction Adjustable Wall Pack Series can be set and locked in to any angle ranging from 0° to 90° to provide exterior security lighting on such facilities as schools, hospitals, office buildings and other commercial or industrial structures. Each of the EarthTronics Adjustable Wall Packs accepts 100 – 277-volt AC power supply. The wall packs provide more than 100 watts per lumens and a high 80+ CRI for improved visual acuity and efficient performance. The 20-watt wall pack provides 2100 lumens, while the 30-watt and 70-watt walls produce 3000 lumens and 7700 lumens, respectively.
The EVE Series is a compact, architectural LED exit sign and emergency light designed for fast installation in wall, ceiling or end mounting commercial applications. Its housing is made from UV stable white thermoplastic that is both flame rated and capable of withstanding high impact. The EVE Series is available in AC only or emergency operation, which includes a nickel hydride (niMH) battery and provides 90 minutes of emergency exit illumination if power fails. The unit includes a constant current charger and a vandal-resistant shield.
Specification-grade, LED, Thermoplastic, snap-together Combination Unit • Thermoplastic frame, faceplate, back plate and canopy • Clear polycarbonate lens covers • Legend, available in Red or Green • Surface mount, canopy included • Single, double or universal face available • Choice of finishes: white or black • Optional brushed aluminum faceplate stencil available • Faceplate includes two field-selectable, snap-in/out chevron indicators • Lead-Calcium or Nickel-Metal Hydride battery offering remote capacity • Choice of MR16 halogen or MR16 LED • Lamp heads are fully adjustable • Models available with or without Improved Diagnostics • Listed to UL 924 Standards • Nickel-Metal Hydride battery combination units UL listed for Damp location
LIGHTPOWER™ Series micro inverter systems, designed for indoor commercial or industrial applications, provide sinusoidal emergency AC power to lighting fixtures equipped with incandescent, linear fluorescent, compact fluorescent or LED lamps between 20 and 55 watts. When normal utility supplied power is interrupted, the unit will automatically transfer to emergency mode in less than one second and begin supplying pure sinusoidal AC power to the load for 90 minutes. LPS features include offline operation for greater efficiency, Lead-Calcium or Nickel Cadmium batteries for low-cost maintenance and low voltage disconnect and AC lockout that protect batteries from discharge damage.
The LiteGear Series, constructed of heavy-duty, 18 gauge steel with a white powder-coat paint finish, is designed for indoor commercial or industrial applications. When normal utility supplied power is interrupted, the LiteGear Series unit will automatically transfer to emergency mode in less than 2 seconds and begin supplying inverted battery-derived AC power to the load for 90 minutes. The unit is capable of operating normally on, normally off or switched loads. LiteGear features include a maximum capacity of 100-250 VA/Watts and surface wall, recessed ceiling or recessed wall mounting.
Nema 4X, Vandal Resistant and Harsh Environment Combination Unit • PVC enclosure, fully gasketed • Faceplate: vandal-resistant polycarbonate • Backplate: 1/8 inch thick aluminum • Canopy: die-cast aluminum • Heads protected by polycarbonate lens • Stainless steel tamper-proof screws • Legend, available in Red or Green • Surface mount canopy included • Single or double face models • Frame includes ½ inch conduit knock-out • White, black or gray finishes • Optional brushed aluminum faceplate stencil available • Two field-selectable, knock-out chevron indicators • Nickel-Cadmium battery • MR16 halogen or LED • Units standard with Improved Diagnostics • Listed to UL 924 Standards, damp location or cold weather • NSF Rated
Class I, Division 2 • Lamps shielded by a clear vandal-resistant polycarbonate cover • Two MR16 halogen or LED lighting heads • Front and Back plates are 1/8” thick aluminum • Stainless steel tamper-proof screws • ½” conduit knock-out entry • High capacity, automatic, solid-state transfer “spark-free” • Fused output circuit • Standard with Improved • Sealed-Maintenance Free Battery Lead-Calcium battery • CSA-US approved to UL924, UL 844 Standard for Class I Division 2, Groups A, B, C and D • Ambiant temperature 50-104F (10-40C) • Certified temperature codes based on lamp types • Certified for use in damp and wet locations
NEMA-4X, NSF, Vandal-Resistant Housing • Die-cast aluminum back plate with internal thermoplastic housing • Vandal-resistant polycarbonate cover • Fully gasketed • Optional tamper-proof screws • White, black or gray finishes • Two MR16 Halogen or LED lamps • Standard Improved Diagnostic • Lead-Calcium or Nickel-Cadmium battery listed for Damp and wet locations, and Nickel-Metal Hydride battery • UL 924 Standard for wet and damp locations, for cold weather option • NSF certified
Die-Cast Aluminum Edge-Lit Exit Sign • Designed to achieve superior visual clarity and performance • Clear acrylic panel provides optimum light transmission. • Computer engraving is used to crisply define each letter and chevron. • Choice of legend background includes clear (single face), white or mirror (single or double face) • No visible fasteners. • Choice of trim plates • Standard finish is brushed aluminum • Self-Powered models contain a Nickel-Cadmium battery • Brownout protection. • Full battery recharge is made in compliance with UL924 specifications. • Self-test and silent diagnostic is optional on all Self-Powered models. • Modular design allows for several mounting configurations. • UL924 Listed
Nora introduces the 900 Series of outdoor-rated LED Emergency/Exit fixtures with die-cast aluminum construction and back-up batteries. Models are cold weather-rated and have self-diagnostics. Available in black, white or bronze, they produce 1200 and 1600 lumens with 5000 Kelvin. The fixtures combine general and EM lighting. Nora also offers dual-head LED emergency lights that may be mounted to a wall or ceiling. Available in black or white, they have ABS housings with UL 5VA flame rating. A smaller, compact LED emergency light (7.625” x 2.375”) is also available with remote and remote HO styles with self diagnostics.
NEMA-4X, High-Performance Industrial Remote Unit • Die-Cast gray housing and heads designed for heavy-duty industrial applications: indoors, outdoors, hose-down areas, cold-storage facilities etc • Can be installed in all temperature conditions: -40°F to 131°F (-40°C to 55°C) • NEMA-4X protection grade against liquids and windblown dust • High-efficacy LED emergency heads outperform traditional 50W incandescent lamps • Innovative head design: four-LED and dual-driver provide illumination even in case of unexpected component failure • Simple and easy to install on walls, poles, columns, struts, on vertical position for poles or columns use mounting bracket (order separately catalog number: PMK1-E) • UL924 Listed
Nema 4X, Vandal Resistant and Harsh Environment Exit Sign • PVC enclosure, fully gasketed • Faceplate: heavy-duty, vandal-resistant polycarbonate • Backplate: heavy duty 1/8 inch thick aluminum • Canopy: die-cast aluminum • Stainless steel tamper-proof screws • Legend available in Red or Green • Surface mount canopy included • Single or double face models • Frame includes ½ inch conduit knock-out entry • White, black or gray finishes • Optional brushed aluminum faceplate available • Field-selectable, knock-out chevron indicators • Self-Powered models standard with Improved Diagnostics • Listed to UL 924 Standards Damp location • AC and AC/DC -40°F to 104°F; Cold Weather Self-Powered -4°F to 77°F • NSF Rated
The Dynamo, or DYN, Series is an industrial LED-based emergency light for wall or ceiling mount application. When primary power is lost, the unit’s highly versatile, superior lumen output will provide a minimum of 90 minutes of illumination. Its polycarbonate covers and shield, thermoplastic housing and die-cast aluminum lamp-heads were specifically designed to make the Dynamo series able to withstand and illuminate demanding environments such as chemical plants, wet locations and food processing or food storage facilities.
Long lasting, efficient ultra-bright white LEDs. Optimal light distribution. Adjustable LED lamp heads increase center-to-center spacing with 8 LEDs in each lamp head. Charge rate/power “ON” LED indicator light and push to test switch for mandated code compliance testing. Long life, maintenance free, rechargeable NICAD battery. Internal solid-state switch automatically connects the battery for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger to recharge a discharged battery in 24 hours. SD self-diagnostic test feature performs monthly, biannually, and annually tests to ensure reliable operation and to meet electrical and life safety codes.
NEMA-4X & NSF Certified EF40: Vandal Resistant • Fully gasketed with a selection of cast aluminum or polycarbonate back plate • Clear polycarbonate UV and impact resistant-lens • Choice of single or double lamp models • Available in 6, 12 and 24V models MR16 or LED • Easy lamp replacement • EF39 comes standard with tamper-proof screws and bit • NSF Certified for food processing plants • NEMA-4X Certified • EF39P and EF40P require mounting plate option when installed on surface mount junction box • CSA Certified to C22.2 No. 141 • Suitable for indoor/outdoor installation • UL924 Listed
Class I Division 2, Groups A, B, C and D, Hazardous Location Exit Sign • PVC enclosure, fully gasketed • Faceplate: vandal-resistant polycarbonate • Backplate: 1/8” thick aluminum • Junction Box: industrial-grade, made of die-cast aluminum • Stainless steel tamper-proof screws • Legend available in Red or Green • Surface Mount • Single face or double face models • ½ inch conduit knock-out entry • Finish: industrial gray • Two field-selectable, knock-out chevron • Standard with Improved Diagnostics • CSA-US Listed • Evaluated to UL844 standard for Class I Division 2, Groups A, B, C and D, T6 • Evaluated to UL924 and UL1598 standard • Suitable for cold weather
Steel Housing • Removable front access panel • Corrosion-resistant baked enamel white or black finish • Up to 3 lighting heads • Various choices of lighting head styles and lamp types • Wall Mount • 1/2” conduit knock-outs • Standard with Improved Diagnostics • Red charger monitor LED indicates charging of the battery • Amber AC-ON LED indicates AC power is on • Momentary test switch allows for quick operational check of entire system • 6V or 12V Sealed Maintenance-Free Lead-Calcium battery • UL 924 Standard
The PGF1 Series is a maintenance-free indoor or outdoor architectural LED sconce. It is wet location listed and dark sky compliant. The sconce offers pathway, perimeter or entry lighting at a mounting height of 8 to 10 feet. It is made of die-cast aluminum, and the acrylic lens has a 95% light transmission to reduce glare.
Die-Cast Aluminum LED Exit Sign • Housing of Die-Cast aluminum in a variety of finishes • Slim-line canopy for top and end mounting • Universal mounting for wall, end, or ceiling • Universal, field-selectable knock-out chevrons • Long-life red or green LED light source. • Dual voltage input: 120/277VAC 60Hz • Low power consumption: less than 3W in any configuration • Self-Powered models with sealed maintenance-free Nickel-Cadmium batteries • UL924 Listed
Thermoplastic Combination Unit • Indirect refractive technology provides bright, even illumination • Choice of MR16 Halogen or LED Lamps, shielded by a clear polycarbonate cover • Exit sign long-life LED light source for low maintenance and superior illumination • Durable injection-molded thermoplastic housing with push-to-snap design. • Optional vandal-resistant shield with tamper-proof screws • Available with sealed, maintenance-free, Lead-Calcium or Nickel-Metal Hydride batteries • Optional advanced diagnostic circuitry, flasher/buzzer, fire alarm activated flasher • Remote load capacity up to 50 watts when supplied with no heads • Available in single or double face configurations both with means for ceiling mounting. • Field-selectable snap-in/out chevrons • UL924 Listed
LED Thermoplastic, universal-mount & snap-fit Exit Sign • Indirect reflective technology provides bright, even illumination • Long-life LED light source for low maintenance and superior illumination • Durable, injection-molded, thermoplastic housing. • Energy efficient power consumption: less than 3.5 watts for Self-Powered version and less than 3W for AC only single or double face • Available with a sealed, maintenance-free Nickel-Cadmium battery • Dual voltage input: 120/277VAC. • Optional Advanced Diagnostic circuitry, flasher/buzzer, and fire alarm-activated flasher • Standard Universal, supplied with two faceplates, back plate for wall mount end and ceiling mounting. • Universal, field selectable snap in/out chevrons • UL924 Listed and damp locations
The PGR Series offers LED performance in a remote fixture, architectural style for indoor or outdoor application and illumination by four high power LEDs. In the event of 1 or 2 LED failures, the unit will continue to operate. The PGR accepts DC voltage, which must be supplied from an external 6-12V DC emergency lighting unit. The remote can be wall mounted by use of a universal molded-in template.
The LSN D Series is a single-phase central lighting inverter that provides a centralized solution to emergency lighting and power back-up with a wide array of options designed to minimize maintenance requirements and optimize emergency lighting performance. When normal utility-supplied power is present, the LSN model central lighting inverter provides load-side line conditioning with "brownout" protection and charges the system batteries when required. As a series that is both user-friendly and security-enabled, the LSN provides features such as a password-protected user interface, email capability, cabinet locks and a monitoring program.
• Sign is illuminated by long-life, energy-efficient LEDs. • Adjustable lamp head assembly, 2 MR16 halogen lamps and a cast aluminum housing and polycarbonate cover and is fastened with stainless steel tamper-resistant screws. • Body will not dent, peel or corrode • Sealed, maintenance-free Nickel-Cadmium, or Nickel-Metal Hydride batteries • 120/277VAC, current limiting temperature compensation, short circuit proof • Advanced Diagnostic circuitry is standard • 1/2” conduit entry on both sides and at the top • CSA US Listed • Evaluated to UL924 standard and to UL844 standard for hazardous locations: Class I Division 2, Groups A, B, C and D.
The EV Series, which provides bright and uniform illumination and increased spacing via two high power LEDs, is a compact architectural emergency lighting unit designed for fast wall mount installation and reliable service. The EV Series has flame-rated, UV stable thermoplastic housing and a lightly textured white finish. The integral LED-based lamp-heads are fully adjustable with a position maintained by a friction fit design, and the unit provides a full 90 minutes of emergency lighting. Features include an environmentally friendly Nickel Metal Hydride battery and a micro-controlled pulse charger.
- Die-Cast Aluminum Housing w/ Textured Bronze Polyester Powder Coat Finish
- Clear Tempered Glass Lens
- Fully Gasketed
- CSA Listed WEt Location For Wall Mounting, Dark Sky Compliant, DLC Listed, Integral EM Battery Available, LED Light Fixture
Specification-grade, LED, Thermoplastic, Snap Together Exit Sign • Thermoplastic frame, faceplate, back plate and canopy • Legend, available in red or green • Surface mount, canopy included • Single, double or universal face available • Choice of finishes: white or black • Optional brushed aluminum faceplate stencil available • Faceplate includes two field-selectable, snap-in/out chevron indicators • Red or Green Long-Life Light Emitting Diodes (LED) illumination • Self-Powered models available with or without Improved Diagnostics • NEXUS® Wired or Wireless system compatible • Listed to UL 924 Standards • UL listed for Damp location (50°F to 104°F, 10°C to 40°C)
NEMA-4X & NSF Certified • NEMA-4X and NSF Certified Indoor or Outdoor use • Choice of fully gasketed cast aluminum or plastic back plate • Comes standard with Phillips head screws and tamper proof screws • Available as single or double MR16 lamp size remote lighting fixture • Include clear polycarbonate UV and impact resistant cover • Tool-less, fully adjustable, aiming swivel head and easy lamp replacement • White, Black or Gray finishes • Surface Mount • Includes a back plate for mounting to a standard 4” octagonal electrical box • UL Listed • Vandal Resistant • NEMA-4X1 • NSF Rated
The CSC Series is a Central Emergency Power System Lighting Inverter available in 5 wattage capacities from 500-2,000 watts. Prewired with easy reusable connectors for fast installation and modular replacement of any component. Industry leading warranty with NO factory startup required. This inverter operates fluorescents, dimmable fluorescent ballasts, CFL, LED, halogen & incandescent loads. The CSC lighting inverters are a powerful, reliable and cost effective way to meet emergency lighting and life safety requirements for a wide range of applications.
Thermoplastic Housing 6V up to 60W & 12V up to 72W Capacities Lead-Calcium or Nickel-Cadmium battery • Injection-molded, UV stabilized Thermoplastic, snap-together design • Corrosion and scratch-resistant, white or black finish • Snap-on, shock absorbent, clear polycarbonate lens covers • Two MR16 protected lighting heads • Wall Mount, Ceiling Mount • Two MR16 Halogen orMR16 LED lamps • Fused output circuit • Units equipped with Improved • Green LED pilot light to indicate AC-ON • Momentary test switch allows for quick operational check of entire system • 6V or 12V Lead-Calcium or Nickel-Cadmium battery • UL 924 Standard • UL 94, 5VA flame rated Thermoplastic housing • Damp location listed (optional)
PRO-2N/PRO-3N • Completely self-contained, thermoplastic construction with a polycarbonate lens • Available with sealed, maintenance-free Lead-Calcium batteries • 120/277VAC 60Hz standard operation, LED pilot light rocker type, test switch, temperature compensated, low voltage battery disconnect, brownout protection and lock out (automatic battery connect) • Optional MR16 LED lamps • Optional advanced diagnostic circuitry • Optional tamper-proof screws • Optional NEXUS® wired and NEXUS® wireless systems • Universal wall mounting pattern keyhole slots and a conduit knockout provide alternate mounting methods • Optional ceiling mount includes safety wire and pre-machined housing to receive a securement screw. • UL924 Listed and damp Locations
IOTA IIS Series Inverters provide emergency power solutions for fluorescent, incandescent, LED, and HID lighting loads. IIS Inverters operate multiple fixtures at full light output from a central battery supply for the 90 minutes required by code. IIS Inverters are perfect and cost-effective solutions for smaller spaces such as office, retail and restaurant applications where typical inverters solutions can be too expensive. Models include 125W to 375W output, and feature ceiling grid, surface mount, or recessed wall mounting configurations.
NEMA-4X, NSF, Vandal-Resistant Housing Battery Unit • MR16 swivel lamp assembly. MR16 LED or halogen lamps of 6V and 12V • Fully gasketed cast aluminum back plate with clear, UV resistant polycarbonate cover. Tamper-proof screws and bit are included. • Available in black, white or gray • Standard temperature 50°F to 104°F (10°C to 40°C). • Sealed, maintenance-free Nickel-Cadmium (UL Listed for damp and wet locations), or Lead-Calcium batteries • Standard 120/277VAC. • Non-audible advanced diagnostic is standard, 15 minute Time Delay and lamp disconnect. • Magnetic test switch • Wall, strut or beam mounting. Not intended for ceiling mount • UL924 Listed • NSF Certified
Metal MR16 Lamp Head • Indoor use • Available as a single, double or triple MR16 size lighting head • Die cast aluminum construction • Fully tool-free adjustable aiming swivel head • Clear glass lens • Powder-coated white or black • Surface Mount • Includes canopy plate for mounting to a standard 4” octagonal electrical box. • UL Listed
The Philips Bodine 4W BSL4L emergency LED driver provides a price-sensitive, high-quality emergency lighting solution for space-limited linear LED fixtures. It supplies up to 520 lumens in emergency mode (based on 130 lumens/watt of load power) for 90 minutes and includes proprietary charging technology designed for low energy consumption and poke-in wiring connections to help simplify installation. In addition, it meets Title 20 CEC efficiency standards and is UL Listed for the U.S. and Canada.
Interior or Exterior For Wet Location • Die-Cast aluminum housing • Clear, polycarbonate lens • Available: off white, black, platinum gray or dark bronze • 1/2” rigid conduit entry • Patent-pending LED light engine • 400-640 Lumens, 5000K • Optional forward-throw light distribution, high-lumen output: increase 25-50%, dual-mode operation • Standard with Improved Diagnostics • Integrated test button and LED optical pipe pilot light • Optional photo-switch: dusk-to-dawn control of normal lighting • Optional remote test: infrared remote control • Optional time delay: choice of 5, 10 or 15 minutes • Sealed Maintenance-Free Nickel-Metal Hydride battery • UL 924 Standards for wet, cold and damp locations • Nema-3R rated for indoor/outdoors cold-weather
Steel Housing 6V & 12V up to 54W Capacities • Each unit comes with two (2) EF18 heads with 9W high intensity incandescent lamps (standard) • Constructed of 20-gauge steel with an off-white baked enamel finish • Available with sealed, maintenance-free Nickel-Cadmium or Lead-Calcium batteries • PulsePlus Charger circuitry offers 120/277VAC 60 Hz., 0.3/0.15A (other inputs available), fused output circuit(s), dual diagnostic indicator lights, temperature compensation, sealed relay, low voltage battery disconnect, brown out protection and lock out (automatic battery connect) • Hinged cabinet door for easy access • UL924 Listed
Die-Cast Aluminum LED Emergency Lighting • Die-Cast aluminum housing, available dark bronze, off-white, black, and platinum gray • Rated for indoor/outdoor wet, damp & cold locations • Wall-mount installation on junction boxes or rigid conduit • Wall-mount back plate includes electrical wire box with snap-on connector • Four power LEDs • Clear polycarbonate lens • 400-640 Lumens • Color temperature: 5000K • Battery: environmentally friendly high-temperature rated, Nickel-Metal Hydride technology • Run time 90 minutes • Optional self-test and diagnostic functions • UL924 Listed. Optional Features • Cold weather: -40°F / -40°C • Forward-throw light distribution • High-lumen output • Dual-mode operation: normally on or off lighting • Photocell
The LN4X Series is a LED exit sign that can be utilized indoors or outdoors and is able to resist high impact, corrosion and damp or wet locations. The series features an oil-resistant gasket for a water- and dust-tight seal, bright, even illumination in either red or green letters and LED lamps that provide more than 20 years of service. Its glass-filled polycarbonate construction is designed for wall mounting in harsh applications or industrial environments.
Eaton Lighting has introduced the Sure-Lites Concealed Emergency Light Series (CEL Series), a new aesthetically pleasing emergency light that is recessed in the ceiling or wall and only visible when in use. Designed for applications where the finest architectural appearance is required, the CEL Series offers maximum protection with high quality MR16 lamps to light a path of egress during an emergency, but minimal intrusion within the environmental setting when not in use.
• Consumes less than 2.5W • PVC frame and vandal-resistant polycarbonate faceplate. Will not dent, peel, rust or corrode. • Available with sealed, maintenance-free Nickel-Cadmium batteries • 2-wire input 120V to 277VAC 50/60Hz. • Diagnostic / Self Test circuitry is standard on all Self-Powered models. • Wall, end or ceiling mounted, with an industrial-grade, Die-Cast aluminum electrical box. 1/2” electrical conduit entry • Legend and chevron comply with UL requirements. Evaluated to UL 844 standard for Class I Division 2, Groups A, B, C and D, Temperature Code: T6. Evaluated to UL 924 and UL1598 standards. • Suitable for cold-weather
Hazardous Location Battery Unit • Ambient temperature: 10… 40°C (50… 104°F) • Advanced Diagnostics option available • Lead-Calcium batteries are sealed, maintenance-free, with up to 72W of emergency power • MR16 LED or halogen lamps, shielded by a clear polycarbonate cover • Heavy-duty 1/8-inch thick aluminum back plate with keyholes for secure wallmount installation • Built-in microprocessor-based battery charger and self-test/self-diagnostic circuitry • 3/4-inch electrical conduit entry on both sides and at the top • Certified for use in Damp locations • Evaluated to the UL924 Standard • Evaluated to the UL844 Standard for Class I Division 2, Groups A, B, C and D • CSA US Listed
The EVO Series is an outdoor, single- or double-head, LED-based remote that accepts DC input from an EV emergency light with remote capacity (EV4 model). The EVO is best utilized as an over-the-door path of egress light for emergency operation. The EVO uses a single three watt rated LED per lamp-head and can be located up to 50 feet from the external power source. It is available in white or black corrosion-resistant finish.
The new Philips Bodine B50CT emergency ballast is designed to work with linear fluorescent and Type A TLED applications. The B50CT operates one lamp in emergency mode and, depending on the wattage and lamp selected, provides up to 1400 lumens initial emergency light output. It is compatible with 13-55W fluorescent lamps and with 7-16.5W Type A TLED lamps, including the Philips LED T8 InstantFit. Please see the product specification sheet or contact the factory for specific compatibility information and other important product details. The B50CT is UL Listed for the U.S. and Canada and meets CEC Title 20 efficiency standards. It does not replace the Philips Bodine B50 fluorescent emergency ballast.
The PG Series is an indoor/outdoor, die-cast architectural emergency unit. It is a wet location listed emergency luminaire with high-output LED technology that provides a path of egress illumination for mounting over entrance or exit ways and perimeter walkways. Standard Spectron® self-testing/self-diagnostic electronics are included, and a battery heater for cold temperature operation is available as an option. Features include 4 long-life, high-output LEDs, wide area illumination patterns and a Brownout detection circuit.
The ILB Series Emergency Battery Packs from IOTA Engineering offer 90-minute emergency operation for LED fixtures in the event of a loss of power. The ILB Series includes models for operating LED loads up to 5, 7 and 12 watts at input voltages up to 12 and 24 volts. IOTA ILB Battery Packs are UL Recognized components and include test switch and charge indicator accessories, a long-life recyclable Ni-Cad battery, and a 5-Year Warranty.
- Steel Housing with White Powder Coat Finish
- Steel Mounting Pan with Hi-Reflectance White Powder Coat Finish
- White Acrylic / DR Extruded Diffuser with Brushed Nickel Finished End Caps And Brushed Nickel / White Decorative Center Trim
- Up / Down Lighting
- CSA Listed Dry Location For Wall Mount Only, Integral EM Battery Available, LED Light Fixture, Motion Sensor
The Philips Bodine UltimateOne combination AC/emergency LED drivers - BAC40EM10 and BAC40EM6 - are a combination of a 40W dimming LED driver with Philips SimpleSet technology and a 10W or 6W emergency LED driver in one low-profile case. The combination design guarantees compatibility between the AC and emergency drivers and helps simplify the installation process.
NEMA-4X, Vandal Resistant and Harsh Environment Combination Unit • 2 MR16 halogen or LED lamps. Adjustable lamp head • Rugged PVC body will not dent, peel or corrode. • The sealed faceplate is constructed with vandal-resistant polycarbonate cover and fastened with stainless steel tamper-resistant screws • Sealed, maintenance-free Nickel-Cadmium batteries • Programmed to ensure unit’s readiness and reliability by monitoring every critical function. • Circuitry offers 120/277 volt, fused output circuit(s), dual diagnostic indicator lights, temperature compensated charger, sealed relay, low voltage battery disconnect, brownout protection and lockout. • Magnetically operated test switch • Can be wall, end or ceiling mounted • UL924 Listed • NSF Certified
Low-profile, slim look and performance in a Remote Fixture • Indoor or Outdoor Use • (4) 100% LED light engine with redundant connections and very wide beam • Powder-coated Die-Cast aluminum construction • Clear Polycarbonate lens • Optional forward-throw light distribution and dual-mode: normal and emergency • Optional high-lumen output: 25-50% additional illumination • Optional photo-switch on normal lighting • Optional remote test: infrared remote control • 400-640 Lumens, 5000K • Off-white, Black, platinum gray or dark bronze finishes • Surface Wall Mount • UL Listed • NEMA-3R • UL Listed for Damp and Wet Location • Operating temperature -40°F to 122°F (-40°C to + 50°C)
High-Performance Industrial Emergency LED Lighting WISPACING IN THE INDUSTRY! spacing at 25-ft height” • High performance LED heads • Up to 1300 lumens per head with 4 LEDs and dual-driver lamp design provides emergency lighting even in case of a component failure • 120-ft center-to-center lamp spacing installed at 25ft. (200ft x 200ft x 30ft, reflectance 10/10/10) • Simple and easy to install vertically on walls, poles, columns and struts • Come standard with NEMA-4X protection against liquids and dust • Standard operating temperatures: 32°F to 122°F (0°C to 50°C), optional cold weather: -40°F to 122°F (-40°C to 50°C)
The LE Series, designed for recessed mounted architectural and commercial applications, consists of edge-lit, architectural LED exit signs featuring elegant styling in multiple finishes, easy installation and long-life LED lamps. Features of the LE Series include bright, even letter illumination in an energy-saving LED edge-lit exit sign configuration, choice of red or green lettering and AC or emergency operation with optional Spectron® self-test/self-diagnostic circuitry.
Made from durable injection molded ABS thermoplastic, flame-rated UV stable thermoplastic and die-cast aluminum, the EVC Series is a compact, architectural LED combination exit and emergency light with the highest reliability. The unit is easy to install in its commercial application and is equipped with an environmentally friendly, long life cycle Lithium Iron Phosphate battery and fully adjustable, dual-ratcheting high output LED lamp-heads.
New IP65-rated, energy saving yard fixtures with an integrated photocell deliver high lumens per watt for dusk to dawn applications EarthTronics, dedicated to developing innovative energy efficient lighting products that provide a positive economic and environmental impact, introduces its new LED Yard Light Series that delivers exceptional lumens and lumens per watt for multiple commercial, educational and residential dusk to dawn large area applications ranging from yards, walkways, parking, campus greens and mixed-use, surrounding spaces to home security. The LED Yard Light Series is available in 40- and 70-watt versions in 4000K, providing a very respectful initial 4000 and 8000 lumens and operating efficiently at up to 114 lumens per watt. The 4000K LEDs provide a white, natural light with a high 70+ CRI for improved visual acuity. Each fixture accepts 100 – 277-volt AC power supply.
The Unseen Solution • Easy access to internal components • Powder coated in a white finish • Finish can be customized on site with paint or wallpaper • Provision for 2 lighting heads • Choice of MR16 Halogen or LED lamp • Complete 360° head assembly door rotation: 180° to open and to close • Slip gear mechanism protects unit and objects against forcibly stop • Recessed mount into ceiling or wall • Includes the electrical junction box • Fused output circuit • Standard with Improved Diagnostics • Recessed illuminated push button serves as test switch and status indicator • Sealed Maintenance-Free Lead-Calcium or Nickel-Cadmium battery • CSA-US
Designed and engineered with style in mind, the Architectural Emergency Light Series 2 (AEL2) features an advanced optical design in conjunction with energy efficient, long-lasting LEDs, providing maximum path of egress lighting performance. The AEL2 is manufactured with an “always on” circuit feature. The AEL2 has the capability to be connected to a switched or un-switched circuit that is used to power the architectural lighting. Therefore, the AEL2 can be used as both an architectural light and as an emergency egress light. The fixture’s architectural sconce shape blends effectively in all decorative interiors and exteriors to provide an attractive alternative to standard emergency lighting fixtures. The AEL2 is designed to compliment both indoor and outdoor architectural lighting schemes by offering both a 3100K and 4600K lumen output option. Constructed of a die-cast aluminum housing with an integral refractive polycarbonate faceted lens, the new AEL2 is UL listed for temperatures between -20°C to 40°C (-4°F and 104°F) and is wet listed for outdoor applications.
Die-Cast Aluminum LED Exit Sign. Superior workmanship, versatile mounting capabilities and long lasting LED performance in an economical design • Frame, faceplate, backplate and canopy are made of die-cast aluminum • Legend available in Red or Green • Surface Mount. Includes canopy • Single face or double face models • Choice of white, black or brushed aluminum • Includes two field-selectable, knock-out, chevrons • Red or Green Long-Life Light Emitting Diodes (LED) illumination • Self-Powered models available with or without Improved Diagnostics • NEXUS® wired or wireless system compatible • Listed to UL 924 Standards • Option: Damp location (50°F to 104°F, 10°C to 40°C)
ConTech’s Adjustable Recessed or Surface Mount Edge-Lit exit Sign has a Nickel-Cadmium battery back-up to deliver more than 3 hours of emergency light. Our REXA can be installed as an end mount, wall or ceiling, recessed or surface with single or double face configuration. Even more options include green or red lettering, white or black housing. This fixture is your one stop shop for all you exit needs.
Class I Division 2, Groups A, B, C and D Remote Fixture • Single or double lamp heads using MR16 halogen or LED • Die-Cast aluminum back plate, gasketed. Clear polycarbonate cover • 6V, 12V, 24V or 120V • Comes standard with tamper-proof screws and bit • Extreme operational temperature range: -40ºF to +104ºF (-40ºC to +40ºC) • Indoor use • Fully adjustable tool-less aiming swivel • Gray finish • Surface Mount • Conduit entry 1/2” NPT • Evaluated to UL 844 Standard for Class I Division 2, Groups A, B, C and D. • T-codes: T3B (10W-12W lamps), T2C (20W lamps) and T4A and T5 MR16 LED
IOTA ICE Series Emergency Battery Packs are designed for outdoor and cold-weather applications from minus 18 degrees to 55 degrees Celsius. ICE Series Battery Packs provide 1300 lumens of emergency illumination for both linear and compact fluorescent lamps, and feature an internal heating blanket that protects the battery pack from freezing conditions.
The EVHC series is a high lumen output emergency lighting unit designed for high mounting height applications. It is available with either a standard 346 lumen lamp, which offers offers 44 feet of spacing on a 16 foot mounting height, or a high lumen option of 546 lumens per head, which offers 67 feet of spacing. Features include fully adjustable high-output LED lamps and an environmentally friendly Lithium Iron Phosphate battery. The EVHC Series is flame rated and can resist high impact.
Class I Division 2, Groups A, B, C and D Certified Remote Fixture Description • Indoor use • Available as a single or double Par 36 size • Thermoplastic construction, with gasketed aluminum canopy plate and junction box • Fully adjustable tool-less aiming swivel head • Specular parabolic reflector and prismatic lens for wide-beam, even light distribution Finish • Gray only Mounting • Surface Mount • Includes a universal aluminum canopy and junction box • Conduit entry ½” NPT Approval • UL Listed • Class I, Division 2, Groups A, B, C and D
ELC is a compact device that converts any LED luminaire from normal to emergency operation when normal power fails. Includes a dedicated driver to operate the luminaire in emergencies even if the normal driver fails and works with any lighting control system. ELC contains no battery and is powered from the Signtex central battery system at 24VDC. Lumen output is calculated precisely for emergency light levels required by codes. Models are available to operate a wide range of LED fixtures including troffers, architectural, down lights, linear lighting and hi bays with a power range from 5W to more than 400W. UL Listed for field or factory installation.
• Lamp heads with MR16 halogen or MR16 LEDs • Die-Cast aluminum back plate. Clear polycarbonate cover. • Input voltage: 6V, 12V, 24V or 120V • Easy installation on a 4” octagonal box (included). Comes standard with tamper-proof screws and bit • Extreme temperature range: -40°F to +104°F (-40°C to +40°C) • Indoor use • Surface mount • Conduit entry 1/2” NPT • CSA US Listed • Evaluated to UL 844 Standard for Class I Division 2, Groups A, B, C and D. Temperature Codes: T3B (10W and 12W MR16 lamps) and T2C (20W MR16 lamps) and T4A and T5 MR16 LED.
Thermoplastic Housing 6V up to 60W & 12V up to 72W Capacities Emergency Light • Simple, compact and contemporary design • Wall-mount or ceiling-mount installation (optional) • Two-piece housing of injection-molded thermoplastic • MR16 halogen or LED lamps, shielded by clear polycarbonate covers • Sealed, maintenance-free, Lead-Calcium or Nickel-Cadmium batteries • Power requirements: 120/277VAC, 60Hz, 0.25A/0.12A • Total load capacity up to 72W • Advanced Diagnostic-Audible (optional) • Certified for Damp Locations (optional) 50°F to 104°F (10°C to 40°C) • NEXUS® interface (optional) • UL924 Listed
• Fully concealed in open cavity walls or ceiling • Only visible when needed • Comes with two (2) MR16 halogen or LED lamps • The Self-Powered unit is contained in a heavy-duty galvanized steel back box • The normally exposed parts (flat door and frame) are powder-coated, textured off-white finish. The surface finish can also be customized on site with paint, wallpaper or other coverings • Include current limiting, temperature-compensated cut-off voltage, brownout transfer, low-voltage battery disconnect and battery lock out • Bar hangers included. • Junction box can be installed on a wall stud or ceiling beam • Diagnostic/Self-Test circuitry is optional
Class I Division 2, Groups A, B, C and D Hazardous Location • PVC enclosure, fully gasketed • Faceplate: vandal-resistant polycarbonate • Backplate: 1/8” thick aluminum • Polycarbonate head covers • Stainless steel tamper-proof screws • Legend in Red or Green • ½” conduit knock-out entry • Field-selectable, knock-out chevron indicators • Nickel-Cadmium or Nickel-Metal Hydride battery • MR16 halogen or LED, fully adjustable • Standard with Improved Diagnostics • CSA US Listed • Evaluated to UL844 standard for Class I Division 2, Groups A, B, C and D, UL924 and UL1598 • Temperature Code: Halogen 10W T3C, 12W T3A, 20W, T2D, All LED lamps, T4A
Housing, trim plate, trim ring and canopy made of die-cast aluminum • U-shaped clear acrylic Legend panel features laser-etched letters and chevrons • Choice of 6 inch or 8 inch EXIT lettering legend, available in Red or Green • For surface or recessed Mount • Choice of finishes: white, black or brushed aluminum, custom colors available. • Choice of Legend panel colors: red on clear, red on white, red on mirror, green on clear, green on white or green on mirror • Self-Powered models available • Listed to UL 924 Standards
- Steel Fascia w/ Textured Black Polyester Powder Coat Finish
- Luminous White 75% DR Acrylic Diffuser
- Steel Mounting Pan w/ Hi-Reflectance White Powder Coat Finish
- CSA Listed Wet Location, Integral EM Battery Wet Location CATEGORIES
Series CBM emergency lighting system from Signtex Lighting comes with automatic email reporting of mandated diagnostic tests as standard equipment, providing automatic compliance with Life safety Codes.This advanced patented system uses low voltage DC distribution and solves the problem of battery maintenance by providing instant notification of any fault to up to six email addresses and allowing battery changeout in minutes by in-house maintenance personnel, without special tools, ladders or factory training. Replacement SLA batteries are standard models available from any local commercial distributor. Initial cost is competitive with alternates, and operating life cycle costs are lower than any other emergency lighting system.